Medical packaging bags, using the semi-dialysis permeability of the packaging bags through sterilization factors and not bacteria, show that the aging bacteria resistance of the packaging bags can reach 3 to 5 years: medical gloves, hemostatic gauze, surgical hole towels, medical catheters, medical syringes, protective clothing, intravascular catheters, tracheal intubation, surgical clothing, indwelling needle, electric knife pen, heparin cap, three-way cock, roar cap, balloon, artificial joint, sterilization, packaging of medical consumables such as occluders, and packaging of high-end medical instruments.  After sealing, the EN868 was professionally tested by the Medical Testing Institute of Suzhou University.

Quality determination method: no paper scraps during separation;  Testing the stripping force of sealing edge;  Aliases such as no leakage for testing of edge sealing bacteria leakage are summarized as follows: medical packaging bag, medical sterilization packaging bag, medical sterilization packaging bag, medical packaging bag, medical device packaging bag, sterilization packaging bag, medical sterilization bag, medical sterilization bag, medical sterilization packaging bag, paper-plastic sterilization packaging bag, paper-plastic sterilization bag, sterilization bag, paper-plastic sterilization bag, medical sterilization bag, medical sterilization packaging bag, medical sterilization packaging bag, medical sterilization packaging bag, paper-plastic bag and medical paper.

What are the usage methods of medical packaging bags?

1. The heat-sealed bag surface should be combined with the plastic surface of the medical packaging bag to ensure the peeling safety;

2. The placement direction of sharp instruments shall be opposite to the stripping direction, and the temperature of hot cover shall be 200-230℃;  The heat sealing pressure is 0.15kg/cm2;  The delay time is 4-6 S. 。

3. Seal the mouth of the bag with a sealing machine, and mark the sterilization time, content and use information

4. According to the size of the items to be sterilized, the sterilized items should not exceed 3/4 of the length of the sterilization bag, and an appropriate sterilization bag should be selected so as to ensure sufficient sealing. Clean and dry items should be put into the heat-sealed flat pocket, otherwise the possibility of bursting of the sterilization bag will increase.

5. Sterilize the sealed medical packaging bag according to the paper and the paper according to the conventional method. Then place it in steam sterilization or ethylene oxide equipment.

6, confirm the sterilization process indicator discoloration;  Ethylene oxide is pink before sterilization and brown after sterilization. It is blue before steam sterilization and grayish black after sterilization.

7. Remove the sterilization indicator bag according to the stripping direction and take out the articles.

8. when it is necessary to use, store the sterilized bag in a dry, dark and clean area for later use.